TRUCK MOUNTED LIFTS
Your single source of supply for truck mounted Elevating Work Platforms.
Monitor E209PX Fuso 515 4x2
Working Height: 19.9 m
Working Reach: 8.49 m
Licence Type: Car Licence
Monitor E209PX Fuso 815 4x2
Working Height: 19.9 m
Working Reach: 8.49 m
Licence Type: Light Rigid Truck Licence
Monitor E209PX Hino 817 4x4
Working Height: 19.9 m
Working Reach: 8.49 m
Licence Type: Light Rigid Truck Licence
Working Height: 24.8 m
Working Reach: 14 m
Licence Type: Medium Rigid Truck Licence
FAQ's
You can purchase high-quality truck mounted EWPs from Monitor Industries, Australia’s leading supplier of elevated work platforms. With branches in Sydney, Brisbane, Melbourne, Tamworth and Perth, Monitor offers a wide range of truck mounts built for utilities, construction, arbor, civil, mining and hire companies. All units are professionally mounted and engineered to Australian Standards, backed by 24/7 national support for parts, service, training and rental solutions.
Truck Mounted EWPs can reach from 13 metres up to 30 metres. At Monitor, our truck mounts are designed for safe, stable work at extreme heights — ideal for telco, utilities, and building maintenance.
The Monitor Truck Mounts have an outreach from 7.5 metres to 40 metres horizontal working outreach.
Yes. In Australia, if the Truck Mounted EWP has a boom length of 11 metres or more, operators are legally required to hold a High Risk Work Licence.
For smaller truck mounts under 11m, a licence isn’t mandatory, but most companies still require operators to complete EWP training (Yellow Card) to ensure safe operation.
At Monitor, we also provide a comprehensive handover with every hire or purchase, led by our trained technicians. This ensures operators are confident, compliant, and fully prepared to use the equipment safely.
Truck Mounted EWPs generally take 10–15 minutes to set up, depending on site conditions. They require space for stabilisers, correct ground support, and safety checks before operation. While setup takes slightly longer than a spider lift, truck mounts deliver greater height and outreach once ready.
A high quality machine will have a long service life if it’s properly taken care of. Truck lifts should have a quarterly service every 3 months, and an annual service every year.
Few Truck lifts can be ordered with a fly jib, a smaller boom that allows you to make finer movements at reach. By only moving the small fly jib, you won’t sway the main boom, making the job much more stable, safer, and much easier to get the job done
Safety, speed, and efficiency while working at height
Truck Mounted lifts are a specialised Elevating Work Platform (or EWP), designed to help people work safely at heights.
One of the most versatile types of EWP in Australia, Truck Mounted Lifts have many features that make them ideal for arborists. Truck Mounts:
• Are reliable for quick set up and pack up
• Are cost effective ensuring you make the most from each contract
• Can be set up on slopes
• Can be set up on rough terrain
• Are easily transportable with no need for GVM rated trailers or extras
• Offer great working outreach and height
This means they have a considerable advantage in setting up in domestic areas where space is at a premium.
What industries can benefit from using truck lifts?
Truck lifts offer the right combination of safety, efficiency, and adaptability that many businesses can benefit from. These include:
Arborists
Using a Truck lift helps arborists avoid the dangerous task of having to climb trees all day, every day. They help increase safety and prevent fatigue for workers. Truck lifts can also be a more cost effective solution for arborist businesses than paying professional tree climbers.
Tradies
Painters, electricians, and plumbers can all benefit from using a Truck lift. The machine avoids the need for scaffolding, offers quicker set up time, and allows tradies to access difficult areas more efficiently.
Property Maintenance
A Truck lift helps property maintenance workers to clean windows from a solid platform without the use of scaffolding.
Electrical authorities
Truck lifts can help electrical workers to operate around the confined spaces of a substation
What boom configuration works best?
Truck lifts are available in either knuckle boom or stick boom configuration. Each has its advantages.
Knuckle booms are crucial in an application which requires “up and over” reach. For example, if you’re an arborist needing the clearance to reach over a fence or other obstacle to access a work area, a knuckle boom will achieve this.
Stick boom lifts on the other hand have no tail swing, which allows you to achieve maximum outreach at a lower vertical reach in most situations. This is ideal when you need a large outreach in an area with overhead obstacles above the machine, such as a roof in an indoor application.
Is a fly jib important?
Few Truck lifts can be ordered with a fly jib, a smaller boom that allows you to make finer movements at reach. By only moving the small fly jib, you won’t sway the main boom, making the job much more stable, safer, and much easier to get the job done
What servicing is required for a truck lift?
A high quality machine will have a long service life if it’s properly taken care of. Truck lifts should have a quarterly service every 3 months, and an annual service (you guessed it!) every year.
Australian Standards also require a 10 year rebuild/recertification for spider lifts, followed by a rebuild every 5 years.
What size truck lifts are available?
Truck lifts range in size from 12 metres to 75 metres vertical working reach, and from 7.5 metres to 40 metres horizontal working outreach.
In terms of basket capacity, you’ll find models ranging from one man 120 kg Max Rated Capacity (MRC) all the way up to the larger three man 330Kg MRC.
Which truck lift is best suited to the arbor industry?
There are many different factors to consider when choosing the ideal Truck lift for your business. Some EWPs are best suited to domestic applications, while others are ideal for commercial work.
What advantage does basket rotation give you?
Some truck lifts offer the option of a rotating basket, allowing you to approach your work at an angle. This can help you deal with obstructions, but still face directly on to the working area. A rotating basket can make it far easier to reach particular areas of a tree.
How can I tell the maximum weight a truck lift basket can handle?
There are four ways to identify the Max Rated Capacity (MRC) of a machine:
• Decal on the basket
• On the ID plate on the machine
• Envelope diagram decal (What capacity at what reach)
• Operator’s manual with your machine
To ensure you are working within the truck lift’s MRC, make sure you consider the weight of tools, harnesses and workers – in fact anything you’ll have inside the basket. Some larger machines can have a safe working load of 330Kg or more.
What optional extras are available when purchasing a truck lift
There are two broad categories of accessories which are available, depending on the exact machine you choose. These are either factory fitted, or optional extras.
Factory fitted accessories
• Self-levelling system
• Basket rotation
• Fly jib
• Radio controlled remote
• Telescopic boom
• 240 v electric output in basket
Optional accessories
• Anti-Entrapment Device (AED)/crush device. This has an auto stop or reverse feature when the operator comes into contact with the roof.
• Additional cover protection kit
• Stabiliser pads for use on softer ground or fragile surfaces
• Safety harnesses and lanyard
• EDD (Emergency Descent Device)
Talk to us to find the ideal truck lift for your application
To find out how a truck lift could offer you a more efficient access solution, call Monitor on 1800 025 024 or contact us online.
- 143 Gunnedah Rd, West Tamworth NSW 2340
- (02) 6755 6000
- 49-50 Cassola Pl, Penrith NSW 2740
- (02) 8678 5537
- 24-28 Williams Rd, Dandenong South VIC 3175
- (03) 9791 7178
- 2 Alta Road, Caboolture QLD 4510
- 191 Magnesium Dr, Crestmead QLD 4132
- 11 Reihill Rd, Maddington WA 6109